Breathable, active insulation for use across a broad range of mountain hunting conditions. Worn as outerwear in cool conditions or as insulation under a jacket in cold conditions. 

The Cirque LITE Vest is a streamlined version of our popular Cirque LITE Jacket and is designed to integrate into nearly any system for endless layering options. The minimalist, breathable design works as outerwear in mild conditions or as a warm and breathable mid-layer that won’t create bulk or impede mobility as you stack layers on top. Body-mapped construction places PrimaLoft® Gold synthetic insulation in the torso and neck while ultra-breathable microgrid fleece side panels purge sweat during high levels of activity. Designed for all-season wear, the Cirque LITE Vest is an essential active insulation layer that can be put to work in nearly every mountain hunting scenario. 

• 9.6 oz. (Large)
• Body-mapped, hybrid fabric construction
• 60g/m2 of PrimaLoft® Gold synthetic insulation
• 15 Denier weather-resistant Pertex® face fabric
• Breathable microgrid fleece side panels treated with Polygiene ® odor control
• Adjustable elastic waist
• 2 hand pockets strategically placed for use while wearing a pack
• Internal stretch pockets for storing and drying gear
• Extended tail for wear with a pack

TECHNOLOGY

Pertex® Quantum uses a tightly woven structure to provide a light and soft fabric that allows insulation to fully loft while also being quiet, wind-resistant, lightweight and packable.

For hunts requiring warmth, especially in cold and wet conditions, Primaloft® Gold insulation is a go-to for technical performance. Engineered for a full spectrum of benefits to provide warmth without bulk resulting in freedom of movement for your activity. One of the main differences between natural down insulation and Primaloft® is the ability to maintain warmth when wet.

STONE GLACIER SIZING CHART

Stone Glacier products are designed with an athletic fit to provide the highest level of performance in the field. Use the sizing chart below to help guide you to the appropriately sized garment. Note, the De Havilland Pants incorporate our patented Contour™ Waist System which provides approximately 3 inches of waist adjustment to create an exact fit.

HOW TO FIND YOUR MEASUREMENTS:

Note: Calculate your body measurements, then select your product size. If your measurements are between sizes, select a larger size for a looser fit or a smaller size for a tighter fit.

1. Measured Chest: With arms relaxed at your sides, measure under your arms, around the fullest part of your chest.
2. Measured Sleeve: With arm relaxed at your side and slightly bent, measure from center back neck, across the shoulder to elbow and down to the wrist.
3. Measured Belt Line: Measure around your waist at the point in which your pants typically ride.
4. Measured Inseam: From a standing position, measure from your crotch down the inside leg to the floor.

Nearly all Stone Glacier pants feature our patented Contour Waist™ system, which allows for three inches of waist adjustment. Additionally, SG pants are sized accordingly for layering. If you wear a large in our base layers, you will also wear a large in other SG layers. If you are still unsure of what size pants to buy, measure your waist and reference the "Measured Belt Line" chart below.

 PROPER FIT & USE:

Our patented Contour Waist™ System is designed to provide an exact fit around your waist. No more buying pants that are slightly too large or don’t fit quite right. As well, this system allows you to adjust the waist size of your pants to allow for a proper fit when layering base layers or insulation bottoms underneath. To adjust the Contour Waist, follow the below steps:

Note: Proper fit is best achieved by adjusting the Contour Waist while wearing the pants.

1. Unfasten the top buckle attachment and unzip the zipper fly.
2. While the zipper fly is unzipped, detach the left side (left as when the wearer is looking down on the zipper fly) of the zipper from the hook and loop pad by pulling it down and away, starting at the top.
3. Reattach the zipper fly to the hook and loop pad by starting at the bottom and pressing it firmly and evenly up towards the top. Attaching the zipper at a steeper angle to the left, will adjust the pants smaller. Attaching the zipper further to the right will adjust the pants larger.
4. Once the zipper is reattached, zip up the fly as normal and fasten the top buckle, adjusting tension as necessary. Repeat steps 3 & 4 until the proper fit is achieved.
5. Once you find your proper fit the zipper fly will work as normal and adjustment does not need to be made again until required when layering or as desired.